RJ45

From CoreInfo
Revision as of 20:15, 12 September 2012 by Admin (talk | contribs) (→‎patch cable (crimping colors T568B))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Crimping RJ45 Patch cable (T568B)

Category 6 cable can be identified by the printing on the side of the cable sheath.<ref>Ethernet Cable Identification and Use</ref>

Cat 6 patch cables are normally terminated in 8P8C modular connectors. If Cat 6 rated patch cables, jacks, and connectors are not used with Cat 6 wiring, overall performance is degraded to that of the cable or connector.

Connectors use either T568A or T568B pin assignments; although performance is comparable provided both ends of a cable are the same, T568B is a deprecated standard and no longer supported by TIA.

Pin T568A Pair T568B Pair Wire T568A Color T568B Color Pins on plug face (socket is reversed)
1 3 2 tip Pair 3 Tip
white/green stripe
Pair 2 Tip
white/orange stripe
Rj45plug-8p8c.png
2 3 2 ring Pair 3 Ring
green solid
Pair 2 Ring
orange solid
3 2 3 tip Pair 2 Tip
white/orange stripe
Pair 3 Tip
white/green stripe
4 1 1 ring Pair 1 Ring
blue solid
Pair 1 Ring
blue solid
5 1 1 tip Pair 1 Tip
white/blue stripe
Pair 1 Tip
white/blue stripe
6 2 3 ring Pair 2 Ring
orange solid
Pair 3 Ring
green solid
7 4 4 tip Pair 4 Tip
white/brown stripe
Pair 4 Tip
white/brown stripe
8 4 4 ring Pair 4 Ring
brown solid
Pair 4 Ring
brown solid

Note: This is from left to right, with the (plastic) tab faced away from you.